Skip to navigation

万博官方网 X™ System

An accessible end-to-end metal 3D printing solution for functional metal parts, next-day.

Get a Quote

The 万博官方网 X System is an accessible way to fabricate complex metal parts in a wide variety of advanced metals.

Simple, Yet Powerful

The 万博官方网 X is one of the most intuitive metal 万博官方网站链接 available today. Print a wide range of materials from stainless steels to copper with minimal training on a closed workflow. Scaling up capacity is easy; just add printers.

Safe and Affordable

The 万博官方网 X is designed to be safe to use and accessible for all fabricators. It costs several times less than DMLS metal 3D printing systems and requires no dedicated operator, no powder management system, and minimal PPE.

Quality Parts, Fast

The 万博官方网 X is purpose-built for consistent part quality and a seamless user experience. Markforged combines superb software, materials research, and an advanced motion system to deliver industrial-grade parts quickly and reliably.

Specs

From design to fully functional
metal parts in as few as 28 hours.

Physical Dimensions

Width 575 mm
Depth 467 mm
Height 1120 mm
Weight 75 kg / 165 lbs

Build Volume

Width 300 mm
Depth 220 mm
Height 180 mm

Printer primary Specs

Printing Process
万博官方网 FFF
Z Layer Resolution
50 μm - 125 μm (Post-Sinter)
Printing Media
Bound Powder Filament
Internal Part Geometry
Closed Cell Infill (Triangular) or Solid Parts
Print Bed
Heated, Auto Leveling, Replaceable Print Sheets

Wash & Sinter

Wash-1

 image of Wash-1
External Dimensions:
609 x 685 x 1,067 mm
Weight:
136 kg (300 lbs)
Washing Time:
12-72 hrs typical
Solvent:
Opteon SF-79
Working Volume:
356 x 254 x 203 mm

Sinter-2

 image of Sinter-2
External Dimensions:
1,200 x 700 x 1,500 mm
Weight:
350 kg (772 lbs)
Run Time:
17-31 hours
Sintering Volume:
18,356 cu cm
Peak Internal Temp.:
1,300° C / 2,372° F

万博官方网

Release Material
Ceramic — Becomes Powder During Sintering Process

Media (Spools)
Bound Powder 万博官方网 Filament

System Details

万博官方网 X Printer

The Markforged 万博官方网 X is a new kind of metal printer. By printing metal powder bound in a plastic matrix, Markforged has eliminated many of the safety risks associated with traditional metal 万博官方网站链接 . That means no loose powder, no lasers, and none of the traditional safety precautions. It’s safe to use in a shop environment with minimal facility upgrades.

In practice, the 万博官方网 X is essentially a very advanced FFF 3D printer. Featuring a precision machined gantry, a heated chamber and print bed, and advanced extrusion hardware, the 万博官方网 X is equipped to reliably print you durable parts. It is intentionally designed, with wear components and consumables — including print sheets, nozzles, and brushes — accessible and trivial to swap.

Wash-1

The Wash-1 is a solvent-based debinding system. It primarily uses Opteon SF-79, a high-performance fluid designed to offer superior cleaning power, higher efficiency, and safety in an environmentally sustainable way — Opeton SF-80 or Tergo 万博官方网 Cleaning Fluid can be substituted if needed.


The Wash-1 operates with simple ventilation and features an extremely simple user experience. It’s been tested and verified as a shop-safe system.

Sinter-2 and Sinter-1

The Markforged Sinter-2 and Sinter-1 are highly optimized tube furnaces used for sintering 3D printed metal parts. They provide leading edge sintering reliability and run times and are equipped with advanced safety features. The Sinter-2 is more advanced than the Sinter-1 — featuring a larger working volume, more precise temperature control, and a mechanical door interlock.

The Sinter-1 and Sinter-2 typically have run times between 26 and 31 hours. However, the Sinter-2 can process small parts in express mode, where it can sinter up to 250g of parts in just 17 hours.

万博官方网

From stainless steel to copper, choose from a wide range of strong, durable, and capable materials.

Design your part, upload it into our browser-based software, select from a wide range of metals, and hit print. It's that simple.

Software

3D Printing Software Meets Production Management

Eiger is our end to end solution for creating and managing parts. Collaborate on parts across teams and start prints from anywhere with an internet connection.

Try it Yourself

Process

Simple and safe workflow
designed for any business.

The Magic of 3D Printing
Process

Resources